Pressure Washers

Additional Views

LANDA NG Water Heater



Up to 4,000 PSI

  • Increases incoming water temperature by up to 150°F
  • Sch. 80 Heating Coil
  • LP Conversion Option

  • Model Specs
  • Features
  • Field Installed Options
Swipe Left for additional information

When you wand to boost the cleaning power of your cold water pressure washer without upgrading to a new machine, consider an alternative; one of Landa's hot water generators.  Simply attach the natural gas heated NG to your cold water pressure washer, and transform your machine into a powerful hot water washer.  The NG includes and option for LP gas and features electronic ignition. 

Buy with Confidence!  Landa's advertised specifications (PSI, GPM, etc.) are certified by the Cleaning Equipment Trade Association to be correct.  And, of course nearly all Landa equipment is ETL certified to UL-1776 and CSA safety standards.

Feature GPM PSI Temperature Rise* Heating Coil BTU Per Hour
NG-3000 Up to 6 Up to 3,000 Up to 150° F  1/2" Sch 80 / 154 ft. 420,000
NG-3000LM Up to 10.6 Up to 3,000 Up to 150°F 3/4" Sch 80 / 360 ft. 800,000

* Variable depending on flow rate (3-10 GPM)

  • Extra-durable Heating Coil made of leak-free, cold-rolled, Schedule 80 steel pipe with five year warranty.
  • Helpful Tri-Lingual Labels with operating instructions in English, Spanish and French for owner and operator protection.
  • 9 feet of wire-braid, Hose with coupler for connecting to cold water pressure washer.
  • Modulating Gas Valve adjusts gas flow to keep temperature consistent at higher flow rates (NG‑3000LM only)
  • High-efficiency Burner with millivolt ignition and standing pilot; also Honeywell gas valve
  • Rugged 12‑gauge steel Chassis protected by weather-resistant epoxy powder coat paint.
  • Triple Safety Protection, including a rupture disk, high-limit thermostat and flow switch to prevent the build up of excessive pressures or heat.
  • Kit to convert fuel to LP gas for NG-3000 model
  • Kit to convert fuel to LP gas for NG-3000LM model
  • Support table, 8” (for NG-3000LM)