Pressure Washers




Up to 3.8 GPM | 3500 PSI

  • Heavy-Duty Motor
  • Sch. 80 Coil
  • Easy to Service
  • 7 Year Pump Warranty
  • 5 Year Coil Warranty
  • 1 Year Labor Warranty
  • Model Specs
  • Features
  • Field Installed Options
Swipe Left for additional information

Looking for the ruggedness of a skid style pressure washer with the convenience and portability of a smaller unit?  The MHP is the perfect hybrid, combining a hardy 1 1/4-inch square steel tube and Schedule 80 col with an extra narrow chassis and frame for easy maneuverability through doorways and other tight spaces.  The side panels are easily removable should your machine require servicing.  An optional hose reel and wheel kit add value and versatility to this unit, helping you clean even the most cramped spaces easily and efficiently.

 Buy with Confidence!  Landa's advertised specifications (PSI, GPM, etc.) are certified by the Cleaning Equipment Trade Association to be correct.  And, of course nearly all Landa equipment is ETL certified to UL-1776 and CSA safety standards.

Model GPM PSI Engine CC's Start Pump RPM Ship Wt.
MHP4-30324E 3.5 3000 Honda GX340 389 Elect 1160 555
MHP4-35324E 3.8 3500 Honda GX390 389 Elect 1185 545
MHP4-35224E 3.8 3500 Vanguard 16 479 Elect 1185 525
  • Rugged High Pressure LANDA Pump, with three ceramic plungers, forged brass head and 7-year warranty, is connected to the engine by a belt-drive assembly that features cast-iron bushing Pulleys and two notched V cogged belts, which provide a cooler operation and longer life; also Two-Bolt Adjustment makes it easy to adjust the belt tension.
  • Industrial-duty Gasoline-Powered Honda or Vanguard engine with overhead valves and easy-access oil drain line; all have keyed Electric Start
  • Durable polyurethane Battery Box with vibration isolators for a secure ride
  • Optional Wheel Kit adds portability to the self-contained design.
  • Four quick-couple Nozzles are made of hardened stainless steel and are mounted for ready access.
  • Two rust-free, 5-gal. Fuel Tanks are see-through for monitoring fuel levels and have elevated fuel lines to prevent debris from damaging the burner (MHP4-35224E only)
  • Insulated, spring loaded Trigger Gun with easy-to-attach Detergent Injector and insulated, dual-lance Variable Pressure Wand make it easy to switch between wash and rinse modes.
  • Many Safety Features, including a rupture disc and thermal pump protector to prevent the build up of excessive pressures or heat
  • Metal Side Panels are easy to remove for convenience in servicing.
  • Rugged, 1-1/4 inch square tube Narrow Frame is only 25-inches in width to fit most doorways and is protected by all-weather resistant epoxy powdeer coat finish
  • Swivel Crimp Fitting for ease in attaching hose to trigger gun
  • Conveniently located Control Panel with burner on/off switch, monitor light and hour meter for maintenance monitoring
  • High-efficiency 12VDC Burner is mounted on the end for ease of servicing and adjustments
  • 50 ft. of 3/8-inch, wire braid LANDA Tuff-Flex Hose rated for up to 5000 PSI and featuring a 24-inch Hose Guard for burst protection
  • Extra-durable Heating Coil made of leak-free, cold-rolled, Schedule 80 steel pipe with 5-Year Warranty
  • Unique lift out design allows for easy and quick Coil Access by removing six bolts
  • Helpful Tri-Lingual Labels with operating instructions in English, Spanish and French for operator and owner liability protection.
  • Safety Certified to UL-1776 Safety Standards
  • ISO 9001 Registered
  • CETA Performance Certified
  • Float Tank & Inlet Detergent Metering Valve
  • Caster Wheel Kit
  • Stainless Steel Outer Wrap
  • 100' Landa Pivot Reel
  • 100' Landa Non-Pivot Reel